• TOOL STEEL - 1.2436 / SKS2 / X210CrW12 / ХВГ / CrWMn / d6
  • TOOL STEEL - 1.2436 / SKS2 / X210CrW12 / ХВГ / CrWMn / d6
 
  • 1.2436 / SKS2 / X210CrW12 / ХВГ / CrWMn / d6
  • 1.2436 / SKS2 / X210CrW12 / ХВГ / CrWMn / d6

TOOL STEEL
1.2436 / SKS2 / X210CrW12 / ХВГ / CrWMn / d6

1.2436 Steel Mechanical Properties:

As a high carbon high chromium tool steel 1.2436 has good through hardening properties and dimensional stability combined with high resistance to tempering.

DIN 2436 Chemical  Composition:

C Si Mn P S Cr W
2-2.3 0.1-0.4 03.-0.6 ≤ 0.030 ≤ 0.030 11.0-13.0 0.6-0.8
  • Introduction

  • Heat Treatment

  • Applications

  • Equivalent Grade

  • 1.2436 Introduction:

    High carbon and high chromium, dimensionally stable, ledeburitic 12 % Cr alloyed cold work tool steel, non-deforming, better hardenability, higher cutting capacity and improved wear resistance than 1.2080, low distorsion, good edge holding properties, deep hardening, high compressive strength, high surface hardness after hardening, suitable for air hardening.

  • ANNEALING

    Anneal at 800-840°C  and slow furnace cool. Hardness after annealing will be approximately 225 brinell.

    HARDENING

    Pre heat slowly to 750-800°C and thoroughly soak. Continue heating to the final hardening temperature of 950-980°C and allow the component to be heated through. Cool in air or quench in oil. 1.2436 is suitable for vacuum (high speed gas) hardening.

    TEMPERING

    Heat uniformly and thoroughly at the selected tempering temperature and hold for at least one hour per 25mm of total thickness. Double tempering should be carried out with intermediate cooling to room temperature.  

  • 1.2346 Steel Applications:

    Typical applications for 1.2436 tool steel include blanking and shearing tools, drawing tools, drawing dies, mandrels, press tools, forming tools and shear blades. It is suited to applications where maximum wear resistance is required.

  • 1.2379 Equivalent Grade:

    AISI EN ISO JIS GOST GB
    D6 X210CrW12 SKS2 ХВГ CrWMn

HOT STEEL

Huangshi Baoyi Materical Co., ltd.

If you like, please subscription!

SIGN UP